![]() That makes it possible to have the motion detector see the door that is being opened and not cause an alarm. If a door set to delay is opened, the motion detector will not trip until the delay time is over. Interior follower means that the motion detector follows an entry/exit door. If the system is armed in away and the motion detector is the first sensor to see an intruder, the alarm will trip immediately. Here is where the interior follower setting comes in. Once the system is armed, the motion detectors are activated. You don’t want to give an intruder 30 to 60 seconds to enter the house in this case.Īway mode is used when the house is empty. This is the mode to use and night when everybody is home, particularly when sleeping. The motion detector is still not active in this mode. If any door, whether defined as a perimeter or delay zone is opened, the alarm will be tripped. Instant mode (no delay) is used when everybody is home for the night and no one is expected to arrive. This is very practical if someone is home and wants the protection that the alarm system gives, but is waiting for someone else to come home. This allows someone to enter the house, while armed in stay and disarm the system. In stay mode, the doors that have been defined as entry/exit, or delay zones, still have the delay time. That is why they are set as interior protection, so they don’t cause an alarm while you are home. You will be walking around so the motion detectors do not turn on. Stay mode means simply that you are arming the system and staying in the house. Often motion detectors are set for interior follower mode, which we will discuss in a minute. Interior mode automatically bypasses that zone when the alarm system is armed in stay (or home) mode. Interior protection is often used for motion detectors. This time is usually set from 30 to 60 seconds but can vary from that. BRINKS SECURITY SYSTEM BEEPING CODEIf a door is set to delay mode, when the alarm system is armed there is a predetermined time that you have to enter the code into the keypad before the alarm goes off. If a door or window is set to perimeter mode, if the alarm system is armed, as soon as the door or window is opened the alarm goes off immediately. Each mode should be used in the regular operation of your system.īefore we go into the arming modes, let’s discuss the three most used ways various zones can respond to being opened while armed. Most modern alarm systems have three arming modes: away, stay (or home), and instant. What are the differences in arming modes of alarm systems. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |